Stirrup Machine
r a c i n g
r a c i n g
MAIN FEATURES:
Our team of designers is always available to customize the base models and meet all specific needs.
- High productivity: the operating speed and the ability to work up to 10 bars simultaneously allow for high stirrup production in reduced times.
- Precision and reliability: the standard Italian-made self-braking motors are designed to maximize the working capabilities of each unit, ensuring precision and long-term reliability.
- Quality components: the electrical components, sourced from the best available brands, ensure high-level performance and long-lasting durability.
r a c i n g
EQUIPMENT AND TECHNICAL SPECIFICATIONS:
- A stopper, essential for fixing the rod on the work surface, which allows to release the stress exerted on the rod at the point before bending, thus avoiding possible deformations of the rod;
- A square pin, to be used together with the stopper, to counteract and nullify the effort exerted on the stopper by bending;
- A stirrup bending pin in special cemented and tempered steel, to be positioned on the rotating plate, for the production of stirrups, as it allows to obtain tight bending radii. To be used with bars up to Ø 12mm;
- A Ø16mm stirrup bending pin in special cemented and tempered steel, to be positioned on the rotating plate, for the production of stirrups, as it allows to obtain bending radii of 8mm (even tighter than those obtained with the standard stirrup bending pin). To be used with bars up to Ø 8mm;
- Three bush holder pins in special cemented and tempered steel, to be positioned on the work surface and completed with bushes. They support, together with the bushes, the stress deriving from the bending phase;
- A set of bushes, designed in detail for each of the stirrup machine models. The radius of the bush positioned in the central hole of the plate corresponds to the bending radius. It is important that the diameter of the bush is at least three times that of the bar to be bent. The bushes are also used as a spacer for the bending bush holder pin, in cases where the alignment of the rod is ineffective. The rod is thus blocked, but the rotation of the bush on the pin allows the rod to slide during bending, thus avoiding possible friction;
- Two pins, to be positioned on the plate to determine the bending angle;
- A set of Allen keys, useful for ordinary maintenance;
- An electric pedal, to facilitate the operator allowing him to have free hands and therefore to work from all sides of the machine;
- A flying plug, which ensures electrical connection;
- Two mushroom buttons, to stop the machine instantly in case of emergency. They are placed on two opposite sides of the machine.
- A stirrup measurer, necessary to determine the length of each side that makes up the stirrup.
The ST-16 mechanical stirrup machine is available in single-phase or three-phase versions.
| MODEL | OPERATIONS PER MINUTE | HP/KW | 65 KG/MM² Ø1 Ø2 Ø3 |
65 KG/MM² Ø1 Ø2 Ø3 |
85 KG/MM² Ø1 Ø2 Ø3 |
85 KG/MM² Ø1 Ø2 Ø3 |
CM | KG |
|---|---|---|---|---|---|---|---|---|
| MODELST-16 1-PH | OPERATIONS PER MINUTE21 | HP/KW2/1,5 | 65 KG/MM² Ø1 Ø2 Ø318 mm 14 mm 12 mm |
65 KG/MM² Ø1 Ø2 Ø30.63 in 0.47 in 0.39 in |
85 KG/MM² Ø1 Ø2 Ø316 mm 12 mm 10 mm |
85 KG/MM² Ø1 Ø2 Ø30.55 in 0.39 in 0.21 in |
CM77x61x100 | KG196 |
| MODELST-16 3-PH | OPERATIONS PER MINUTE21 | HP/KW2/1,5 | 65 KG/MM² Ø1 Ø2 Ø318 mm 14 mm 12 mm |
65 KG/MM² Ø1 Ø2 Ø30.63 in 0.47 in 0.39 in |
85 KG/MM² Ø1 Ø2 Ø316 mm 12 mm 10 mm |
85 KG/MM² Ø1 Ø2 Ø30.55 in 0.39 in 0.21 in |
CM77x61x100 | KG196 |
Category:
ProdottiDate:
8 May 2024